English 
 |
| Quantity: | |
|---|---|
Introduction
BSP Air Classifying Mill
BSP air classifier mill (ACM grinder) unit has 5 parts mainly:
1) mill part 2) cyclone 3) dust collector 4) blower 5) control box
This machine can make superfine powder,and 60~2500 mesh is okay, (but it depends on raw material).
Its application is very wide.
For example,food, chemical,pharmaceutical, herbs...etc.
Work Method & video
There is air classifier in mill chamber.
Powder fine enough can pass the classifier, then be discharged through cyclone.
powder not fine enough will be milled for more time.
That's why it can make super fine powder and can be used as a Fine powder grinder (Fine powder mill).
This is video of our Air Classifying Mill (ACM grinder)
Advantage:
1. There is air classifier in mill chamer.
2. The particle size distribution is relatively concentrated.
3. If you want to change the setting of the machine, you can do it while working.
4. Just set the inverter's frequency, you can change the powder's particle size.
for example, if you need fine powder, you can try 20Hz firstly,
if powder not enough, you can try 25Hz,28Hz...etc;
If you need bigger powder, you can try 15Hz, 12Hz...etc.
Technical Data
| Model | BSP-350 | BSP-450 | BSP-500 | BSP-750 |
| Capacity(kg/h) | 20-200 | 40-500 | 60-1000 | 120-2000 |
| Input size(mm) | < 15 | < 15 | < 15 | < 15 |
| Powder fineness(mesh) | 60-2500 | 60-2500 | 60-2500 | 60-2500 |
| Crush motor(kw) | 7.5/11/15 | 15/18.5/22 | 22/30/37 | 45/55/75 |
| Classifier motor(kw) | 1.5 | 4 | 5.5 | 11 |
| Blower(kw) | 7.5 | 11 | 18.5 | 37 |
| Feed motor(kw) | 0.55 | 0.75 | 0.75 | 1.1 |
| Discharge motor(kw) | 0.75 | 0.75 | 0.75/1.1 | 1.1/1.5 |
| Speed of principle axis (rpm) | -6500 | -5600 | -4400 | -3100 |
| Grading impeller speed(rpm) | 4000 | 4000 | 3500 | 3000 |
| Overall size(L*W*H)(mm) | 5000×1400×2800 | 5400×1500×2900 | 6600×2000×3600 | 9800×2700×4900 |
| Weight(kg) | 1600 | 1800 | 2300 | 3100 |
| Total motor usually (KW) | 21.3 | 31.3 | 55.85 | 105.6 |
working videos from user
These videos are from our clients around the world.
they are using our BSP air classifying mill to produce different kinds of powder products.
FAQ
Q: What will be the lead time of the machine?
A: Usually,the lead time is 30 work days.
Q: How to install the machine?
A: We provide English electric diagram, and English manual.
99% clients can install the machine by themselves under our guidance.
Q: To get a detailed quote or to choose a suitable model, what buyer shall provide?
A: 1) raw material name?
2) capacity the buyer needs to produce? kg/hr
3) target powder size the buyer needs? like 20 mesh, 30mesh, 40mesh,60 mesh.....etc
Q: What is the warranty term?
A: Guarantee against defects in materials and workmanship of equipment and parts for one year. Any parts in need of replacement will be shipped free of charge but labor for installation will not be included. Warranty does not cover abuse or user error and quick-wear parts.
Q: Does the machine have GMP certificate?
A: Our machine can meet the requirements of GMP, but our machine is not food or pharmaceutical products, our machine doesn’t have GMP certificate.
But our machine can be applied in food and pharmaceutical's production
